The Cinelli M-71 Pedal

I’ve always been notoriously fussy when doing cleat fittings. This contact point between shoe and pedal is where it all begins.  Every good fitting session starts with an assessment or review of the cleat position while the rider spins on a stationary trainer.  Get the cleat position just right and the pedal stroke will be smoother and more powerful.  (And, the rider will be less prone to injury and aggravation.)  Left unchecked, the cleat / pedal interface can cause all kinds of problems.  No surprise then that the history of pedals and cleats has always been interesting to me.

This is a pair of CCinelli M-71 pedalinelli M-71 pedals from the 1970s.  This is the fourth generation version and is the most refined or well-developed that Cinelli produced.  Radically different in design, the M-71 that Cino Cinelli developed came to market at a time when the vast majority of riders were using cage pedals with toe clips and straps.

Getting in to the M-71 required the rider to slide their cleated shoe on to the pedal body from the rear.  The rails along the top of the pedal helped to guide the cleat but had to be kept clean of dirt and grit in order to work smoothly.  Cinelli M-71 pedal 2Once the shoe was pushed forward, the rider (or a coach or assistant) would reach down and engage the lever to lock the shoe in place. In theory, if you crashed or fell over, the lever would dis-engage and release your shoe.  That didn’t always work well but, for track events and time trials the M-71 developed a cult following amongst riders looking for more power.  In design terms, Cinelli deserves credit for developing a pedal that gave riders a solid platform to push against while eliminating the need for toe straps that cut off the blood circulation to the toes.  More power and more comfort.

The M-71’s development in the early 1970s predates the popular Look clipless pedal by more than ten years.  Without Cino Cinelli’s radical pedal design, it might have taken even longer for us to move on from toe clips and straps.

3 Responses to “The Cinelli M-71 Pedal”


  • I have had them ( M-71) for years and years. Safer in the event of a fall, as they release on downing, no operator action required. No uncomfortable strap over the foot, they hold tighter ( I have skipped the tire while in a standing sprint uphill) are light, and have minimal friction. No one (without the special cleat) can {easily} hop on and make off with my ride.Why would anyone want a strap? Why would I conform to popular choice? Be unique and stir interest. P.D.

  • Definitely a great design, considering the era. Interestingly enough, the also came with a bunch of cobblers nails to fix the cleats to the leather soled shoes. I have a couple of pair of these in my collection, but am VERY happy that I am riding on LOOK Keos these day…..my knees thank me every time out.

  • Very nice post. I just stumbled upon your blog and wished to say that I have really loved browsing your blog posts.
    In any case I will be subscribing on your feed and I’m hoping you write again very soon!

Leave a Reply to pinterest